4 Cylinder Pumps |
1969 Stock engine with factory cams |
$ 1750.00** |
1971 - 1980 Stock engine with factory cams |
$ 1850.00** |
High Performance 6000* |
$ 2350.00** |
Stage 4 High Performance* |
$ 2650.00** |
Race* |
Inquire |
Pump core charge |
$ 100.00 |
*For modified engines, with non-stock cams. Click here for more info **Prices effective 8/6/22 |
8 Cylinder Pumps |
MONTREAL: includes restoring pump base and oil passage |
$ 2900.00 |
Additional charges may apply to replace bronze connecting rods damaged by plugged oil filters and passages. Please remove the base from the pump & wrap separately to include w/ pump & injectors. If base is left on the pump it can suffer severe shipping damage. |
Pump core charge |
None available |
Other SPICA Pumps |
Exotic SPICA pumps |
Inquire |
Miscellaneous SPICA System Parts |
Fuel Cut off Solenoid Restoration* * Note this is an extra charge: most only need cleaning. |
$ 200.00 |
Oil filter and gasket (4 cylinder) |
$ 22.00 |
Fuel Pressure Switch |
$ 15.00 |
Injectors reconditioned (each)* Click here for more info. |
$ 100.00 |
Set of four: $ 400.00 |
Core charge (each) |
$ 25.00 |
Intake Manifolds restored Click here for more info. |
$1775.00 |
SPICA Book is available on Amazon.com (Kindle version) |
$ 9.99 |
SPICA Book (print copy available with other items only) |
$ 36.00 |
High Performance Throttle Bodies, Restored* *Exchanged |
$ 450.00 |
Throttle body core charge |
$ 75.00 |
Restored/plated fuel injection pipe sets |
|
- 4 Cylinder (set of 4): ultrasonically cleaned, straightened & replated
|
$ 480.00 |
- 8 Cylinder (set of 8): ultrasonically cleaned, straightened & replated
|
$ 720.00 |
Montreal SPICA Parts (Hard to find!) Click here to for pictures. For regular gaskets, seals, etc., contact your favorite Alfa Parts Store. |
Custom Machined Replacement Crank Nuts |
$ 66.00 each |
Flywheel Fasteners |
$ 29.00 each |
Spica Pipe Clamps |
$ 19.00 per pair |
Pistons and Sleeves Set |
$4,500.00 |
Thermostatic Actuators (Rebuilt) |
4 cylinder TA w/ new tube |
$ 385.00 |
4 cylinder TA core charge |
$ 75.00 |
8 cylinder TA w/ new tube |
$ 395.00 |
8 cylinder TA, no core required |
$ 650.00 |
High Performance & Race Components |
ALFA Cams - 4 Cylinder (Each) |
High Performance & Race: 12mm & larger hard-face cobalt welded cams. Core required. All vintage and modern profiles available. |
$ 350.00 |
Core charge |
$ 100.00 |
ALFA Performance Cylinder Heads, Approximate Estimate Click here for photos & info |
Street Stage 1** |
$ 2200.00 |
High Performance** |
$ 2800.00 |
Track and Race** |
$ 3500.00 |
**Cams installed, adjusted and head ready to install |
ALFA Reconditioned Connecting Rods (Set of 4) |
Street: Shot peened and balanced |
$ 450.00 |
ALFA Performance Engines (4 cylinder) |
Street |
Call for estimate |
High Performance |
Call for estimate |
Race |
Call for estimate |
Engine Dyno service |
$1200.00 to $1600.00 |
ALFA Race Engine Components |
Ingram Enterprises Custom-Designed Pistons, Rings, Clips, Pins (4) Made by CP Carillo Click here for photo & info |
$ 990.00 |
Lightweight Carrillo Rods (4) |
$ 1595.00 |
Ingram Enterprises Custom-Designed Sleeves, Set of 4 Made by Darton Sleeves Click here for photo & info |
$ 795.00 |
Machine Work, Hone, Fit Pistons & Rings |
$ 395.00 |
Montreal Pistons (82mm x 10.5 compression ratio), Darton Sleeves, includes Machine Work Complete Set of 8 |
$ 4300.00 |
Aluminium 11 pound Flywheel - 1600, 1750, 2000 & Montreal |
$ 675.00 |
ALFA Engine Components |
Complete crankshaft zero balance |
$ 175.00 |
Clutch balance |
$ 45.00 |
Flywheel balance |
$ 55.00 |
Other ALFA Parts |
Aluminum Radiators*: More info here. |
for 105 and 115 GTV's & Spiders |
$ 650.00 |
with SPAL 12" fan includes bung, 185-deg switch, relay, and harness |
$ 176.00 |
* Lightweight with built in oil cooler/heat exchanger. Efficient Double Pass design. |
Guibo Savers (pair): 105/115 Cars Only |
$ 60.00 |
Kugelfischer Fuel Injection Service and Parts |
Kugelfischer Pumps and Parts |
4 Cylinder pumps
*Modified engine cams cannot be used with stock injection pumps. Price is an average and depends upon the state of the parts before work begins. |
tii Street: $1425.00
Race type pumps: $1525.00 |
|
6 Cylinder pumps |
$ 1750.00 |
Race pumps (Time and Materials) |
$ 135.00/hour |
Other Kugelfischer pumps
Gasket Sets extra for all pumps |
Inquire |
Kugelfischer Components |
Injectors reconditioned and rebuilt* Click here for more info. |
from $125 each** |
* Send spares if possible ** This is an average price range. If more rust & pitting are present, the price will be higher. |
Warm-up unit reconditioned and rebuilt |
$350 to $425* |
* This is an average price range. If more internal rust & corrosion are present, the price will be higher. |